It’s time for part 14 of our groovyghan folks! If this is the first you are hearing about this CAL the full schedule can be found here, to link the groovyghan project on Ravelry click here, or for just this pattern click here. There is a Facebook support group for this CAL which can be found here and you can use the hashtag #kcacoukcal2016 for Facebook, Twitter, Pinterest and Instagram if you want to link in photos and such like on social media.
For a print friendly version of this page please scroll to the bottom of this post and click on the Print & PDF button.
Edited to add: This page has now been translated to Hebrew by the lovely Sarit Grinberg: Checkmate-10-inch-Square-Hebrew-fianl (1)
Part 14: Checkmate 10 inch block:
I’m not going to lie there is potentially a few ends to weave in with this next block but I just love how the overall look is when it’s finished and hope you will too.
As with all the parts to this CAL I have included both the written pattern, chart and a photo tutorial of how I have made this pattern below.
Written Pattern:
Part 14: Checkmate 10 inch block (Make 2):
Notes:
- Hook: UK 4 mm / US Size G
- Yarn: Double Knit / 8 ply / Weight #3
- Yarn Amount required: Each panel roughly uses up 125 yds / 50g / 150 m
- Gauge using Double Knit / 8 ply / Weight #3: 6 tr/dc sts = 1.5 inches / 3.8 cm
If your gauge is different to mine e.g. because you are using a bigger hook and heavier weight yarn all you will need to do is check your own gauge and stick to it – this should mean that the pattern should fit together at the end.
- Finished block size using Double Knit / 8 ply / Weight #3: 10 x 10 inches /25.4 x 25.4 cm cm (your block will be slightly larger if using worsted / aran / 10ply / yarn weight #4)
Pattern uses English (UK) and American (US) crochet terms for a conversion chart click here.
Abbreviations:
- st(s) = stitch(es)
- sp = space
- sl st = slip stitch
- ch(s) = chain
- FDC/FSC = Foundation UK Double / US Single Crochet
- dc/sc = UK double crochet / US single crochet
- STR/SDC = Spike UK treble / Spike UK double crochet
Stitch Guidance:
- Foundation UK Double / US Single Crochet (FDC/FSC): Start with a slip knot on your hook, ch 2, * insert hook in 2nd ch from hook, pull up a loop, yarn over, pull through 1 loop, yarn over, and pull through 2 loops * – 1 FDC/FSC single crochet made with its own chain at bottom, repeat from * to * until you have made the required number of chains. For a photo tutorial of FDC/FSC please see part 2 of this CAL.
- Spike UK treble / Spike UK double crochet (STR/SDC): Work tr/dc over ch-sp by inserting hook into top of the next row below (or the foundation chain)
- UK Double Crochet/US Single Crochet (dc/sc): Insert hook in st indicated and pull up a loop (two loops on hook), yarn over, pull through both loops on hook.
Pattern:
- Note 1: I used multiple colours for this block but you could make the panel in any amount of colours you like.
- Note 2: When changing colours you can either; draw new colour through the last 2 loops on the hook to complete the last stitch and then turn and carry the spare yarn up the side of your work, or you can cut and join colours as needed.
Row 1: FDC/FSC 33 sts, turn (33 sts)
Row 2: Ch 3 (counts as first tr/dc), tr/dc in the next 2 sts, * ch 3, miss the next 3 sts, 1 tr/dc in the next 3 sts * repeat from * to * until end (33 sts)
Row 3: New colour; *Ch 3, miss next 3 sts, work STR/SDC over the next 3 sts * repeat from * to * until end, ch 3, sl st to the top of the beginning ch 3 to join (33 sts)
Row 4: New colour; Ch 3 (counts as first STR/SDC) work 2 STR/SDC over the next 2 sts * ch 3, miss next 3 sts, work STR/SDC over the next 3 sts * repeat from * to * until end (33 sts)
Row 5 – 37: Repeat rows 3 and 4 ending on a row 4 repeat. Note: As you reach the later rows of your work please measure as you go along, depending on how loosely / tightly you crochet. When you reach 9.5 inches / 24.13 cm then start row 38.
Row 38: New colour; Ch 1 ,dc/sc in the same st as the ch1, dc/sc in the next 2 sts, * work STR/SDC over the next 3 sts, then 3 dc/sc in the next 3 sts * repeat from * to * until end (33 sts)
Finishing: Very loosely (as otherwise it will make your panel curl up) slip st along the short edges of your work 33 times (so you have 33 sts on each ‘turned’ end) to neaten your panel and to help with any joining.
Chart:
For crochet symbols in English (UK) and American (US) crochet terms click here.
Blocking:
Some of the patterns in the CAL may need to be ‘blocked’ so that they are equal on all sides (not curling) and fit the size dimensions of the pattern. If you are unfamiliar with what blocking means / or how to do it then please check out the following links:
- What is blocking? http://en.wikipedia.org/wiki/Blocking_%28textile_arts%29
- How to Wet Block a Square by Moogly: http://www.mooglyblog.com/how-to-wet-block-afghan-squares/
- Steam Blocking Video: https://www.youtube.com/watch?v=fSe949pbkBA
You may already have blocking boards to hand but if not anything you can firmly pin your square to will do e.g. a folded up towel or an ironing board.
Part 14 finished block size in double knit / 8ply / yarn weight #3 should be 10 x 10 inches / 25.4 x 25.4 cm (your block will be slightly larger if using worsted / aran / 10ply / yarn weight #4)
Joining:
You can either join part 14 directly to your other parts now (please refer to the CAL schematic below details), or wait until you have completed parts 13 & 15 too – I personally waited so I could get a neater join by joining parts altogether in one sequence.
I joined my pieces together by slip stitching in the back loop only on the wrong side of the work (you could also single crochet either through the back loop or through both loops to join).
- Tip 1: Use stitch markers or knit clips to hold your pieces steady and lined up whilst you join them together; line up your pieces so the edges and stitches match.
- Tip 2: Do not pull your yarn too tight when working your joins. Generally you should have the same sort of stretch that your piece has.
Photo Tutorial:
As the pattern is made up of repeats the photo tutorial shows the first 5 rows only…
Pattern:
- Note 1: I used multiple colours for this block but you could make the panel in any amount of colours you like.
- Note 2: When changing colours you can either; draw new colour through the last 2 loops on the hook to complete the last stitch and then turn and carry the spare yarn up the side of your work, or you can cut and join colours as needed.
Row 1: FDC/FSC 33 sts, turn (33 sts)
Row 2: Ch 3 (counts as first tr/dc), tr/dc in the next 2 sts, * ch 3, miss the next 3 sts, 1 tr/dc in the next 3 sts * repeat from * to * until end (33 sts)
Row 3: New colour; *Ch 3, miss next 3 sts, work STR/SDC over the next 3 sts * repeat from * to * until end, ch 3, sl st to the top of the beginning ch 3 to join (33 sts)
Row 4: New colour; Ch 3 (counts as first STR/SDC) work 2 STR/SDC over the next 2 sts * ch 3, miss next 3 sts, work STR/SDC over the next 3 sts * repeat from * to * until end (33 sts)
Row 5 – 37: Repeat rows 3 and 4 ending on a row 4 repeat. Note: As you reach the later rows of your work please measure as you go along, depending on how loosely / tightly you crochet. When you reach 9.5 inches / 24.13 cm then start row 38.
Row 38: New colour; Ch 1 ,dc/sc in the same st as the ch1, dc/sc in the next 2 sts, * work STR/SDC over the next 3 sts, then 3 dc/sc in the next 3 sts * repeat from * to * until end (33 sts)
Finishing: Very loosely (as otherwise it will make your panel curl up) slip st along the short edges of your work 33 times (so you have 33 sts on each ‘turned’ end) to neaten your panel and to help with any joining.
And that’s it! Part 14 completed!
Don’t forget to stay tuned for Part 15 to be released on 27 July 2016.