Free Crochet Pattern | Christmas Mushroom Tree Ornament

I think I say it every year that one of my favourite things to make are Christmas decorations, and it’s become somewhat of a tradition that I create a new free tree ornament pattern for you to enjoy too. This year I’ve gone a bit non-traditional but still fun – it’s a Christmas Mushroom!

FAVOURITE PATTERN ON RAVELRY

Well actually it’s probably a Christmas toadstool but I’ve been singing Christmas mushroom to myself in my head so I’m afraid that title has stuck.

Apparently the red and white speckled fungi are known in German as gluckspilz which literally means ‘lucky mushroom’ which I really like and I think we can all do with a little luck to get past 2020 don’t you!

I’ve added a little twine to the top of my mushrooms so they can hang from the tree, but you could easily incorporate them into a wreath hanging on your door or even as part of a holiday table centrepiece.

FAVOURITE PATTERN ON LOVECRAFTS

They also don’t have to be just red, I experimented, because I got a little bit addicted to making mushrooms, with a few different colours – so you could match your fungi to your own decor.

Last year you may remember that I made a little Christmas bell tree decorations (FREE pattern here) with some Anchor Crafts Creativa Fino from my stash. I really like Creativa Fino to work with, it’s a nice firm mercerised cotton which I think works particularly well for amigurumi and ornaments like this one so that’s what I’ve used this year too.

FAVOURITE PATTERN ON ETSY

The following Christmas Mushroom Tree Ornament pattern is free here on the blog but it’s also available in my Ravelry store, LoveCrafts or Etsy store, where there is a nominal fee for a downloadable PDF pattern if you’d prefer.

The pattern is available in both UK and US crochet terminology via the PDF download; the pattern below is written just in UK terms.

Christmas Mushroom Tree Ornament

MATERIALS

Yarn:

Anchor Creativa Fino: 4ply; 125m per 50g ball; 100% Cotton

  • 1 ball in #00258 (A) – Red
  • 1 ball in #00926 (B) – Cream

Anchor Metallic Thread: Viscose (80%) and metallised polyester (20%)

  • 1 ball in #00304 (C) – Metallic White

Pattern will work in other hooks and yarns though finished size will be different.

Hook: 3mm (US size D/3)

You will also need:

  • Stitch Marker
  • Scissors
  • Yarn needle
  • Small amount of toy stuffing
  • Length of twine for hanging loop

Gauge: 5dc = 2.5cm / 1 inch

Obtaining the correct gauge is not critical to this  project but if your gauge does not match then your finished item will be a different size.

Finished Size: 9cm / 3.5 inches

ABBREVIATIONS: UK Terminology

  • st(s) stitch(es)   
  • st  sl               slip stitch    
  • ch(s) chain
  • dc double crochet
  • dc2tog double crochet two together
  • htr             half treble

STITCH GUIDANCE:

  • Slip Stitch (sl st): Insert hook in st indicated, yarn over and draw through all loops.
  • Double Crochet (dc): Insert hook in st indicated and draw up a loop (two loops on hook), yarn over, draw through both loops on hook.
  • Double Crochet (dc2tog): Insert hook in st indicated and pull up a loop (two loops on hook), insert hook in next st, yarn over, pull up a loop, yarn over, pull through three loops on hook.
  • Half treble (htr): Yarn over, insert hook in indicated st and pull up a loop (three loops on hook), yarn over, pull through all three loops on hook.

PATTERN NOTES

Magic ring: is also known as a Drawstring Ring or Magic Loop and is often used as a start for working amigurumi. If you are not  familiar with this technique you could substitute with a ch2 and then work in the second ch from the hook.

Working in the round: This pattern is worked in the amigurumi style (unless specified), in a spiral without slip stitching or turning chains 

Working in the Back or Front Loop Only (BLO / FLO): If you hold your piece of crochet in front of you with the Vs of the stitch on top, the part of the V closest to you is the front loop. The part of the V farther away from you on the opposite side is the back loop. When a pattern asks you to crochet into the back loop or front loop only insert your hook into the relevant loop and crochet as instructed.

Pattern:

Top of Mushroom

Rnd 1: With YARN A; working into a magic ring, 6dc. 6sts

Note: Do not pull magic ring too tight as you will thread some twine through the centre.

Rnd 2: [2dc] around. 12sts

Rnd 3: [1dc, 2dc] around. 18 sts

Rnd 4: Dc around.

Rnd 5: [1dc in next 2sts, 2dc] around. 24sts

Rnds 6-9: Dc around.

Rnd 10: [1dc in next 3sts, 2dc] around. 30sts

  • Fasten off YARN A with a sl st to the next st and weave in ends.
  • With YARN C embroider some spots on to your mushroom top
  • Create a hanging loop from twine and thread the loop through the centre of your magic ring with a knot to secure.

Underside of Mushroom

Rnd 11: Attach YARN B to the BLO of any st; [1dc in next 3sts, dc2tog] around. 24sts

  • Start to stuff, continue to stuff as you go.

Rnd 12: [1dc in next 2sts, dc2tog] around. 18sts

Rnd 13: [1dc, dc2tog] around. 12sts

Rnd 14: [dc2tog] to end. 6sts

  • Fasten off and use yarn tail to sew up the last 6sts

Mushroom Stalk

Rnd 1: With YARN A; working into a magic ring, 8dc. 8sts

Rnd 2: [2dc] around. 16sts

Rnds 3-5: Dc around.

Rnd 6: [1dc in next 2sts, dc2tog] around. 12sts

  • Start to stuff the mushroom stalk; continue to stuff as you go

Rnds 7-9: Dc around.

Rnd 10: [1dc in next 2sts, dc2tog] around. 9sts

Rnd 11: Dc around.

Rnd 12: BLO; Dc around.

Rnds 13-14: Dc around.

  • Fasten off with a sl st to the next st but leave a long yarn tail.

Rnd 15: Attach YARN C to the FLO; of rnd 12; ch2, 2htr in same st, 3htr in each st around until end, sl st to the beginning ch2 to join. Fasten off and weave in ends.

  • Stitch the mushroom stalk onto the bottom  centre of the mushroom top.

And that’s it!

If you hook up a Christmas Mushroom Tree Ornament I hope you’ll maybe give it a ‘love’ on Ravelry, LoveCrafts or Etsy store by saving to your favourites, tag @kcaco.uk on Instagram or share your projects in my Facebook group as I love to see your finished work! 

Until next time folks! Happy hooking and keep calm and crochet on my friends xx

Wordpress-Signature

Free Crochet Pattern | Little Christmas Bell Tree Ornament

I think I’ve said before that one of my favourite things to crochet and make are Christmas decorations. I love that they become part of the fabric of your Christmas and bring back memories as they are brought out again year after year. So I decided to make another one this year that I’d like to share with you – it’s for a Little Christmas Bell ornament for your tree.

Now you can add the perfect finishing touch to your Christmas tree this festive season with a little handmade bell decoration that really rings! With easy simple steps this mini bell decoration is a fun and fast gift to make or to keep for your own tree.

Last year you may remember that I made some mini tapestry tree decorations (FREE pattern here) with some Creativa Fino yarn kindly gifted from Anchor Crafts. I really like Creativa Fino to work with, it’s a nice firm mercerised cotton which I think works particularly well for amigurumi and ornaments like this one.

The following Little Christmas Bell Tree Ornament pattern is free here on the blog but it’s also available in my Ravelry store where there is a nominal fee for a downloadable 3 page PDF pattern free of advertisements if you’d prefer.

The pattern is available in both UK and US crochet terminology on Ravelry though the pattern below is written with both terminology combined for ease.

SAVE PATTERN ON RAVELRY HERE

Little Christmas Bell Tree Ornament

MATERIALS

Yarn:
9g / 25m of Anchor Creativa Fino Gold or Silver Coloured 4ply Cotton
0.85g / 2.5m of Anchor Gold or Silver Metallic Thread Small amounts of Anchor Creativa Fino Red and Green 4ply Cotton

Pattern will work in other hooks and yarns though finished size will be different.

Hook: 2.75mm (US size D/3)

You will also need:

  • 1 x 10mm gold or silver jingle bell
  • Stitch Marker
  • Scissors
  • Yarn needle

Gauge: 6dc = 2.5cm / 1 inch

Obtaining the correct gauge is not critical to this  project but if your gauge does not match then your finished item will be a different size.

Finished Size: 8cm / 3.14inches

ABBREVIATIONS:

  • st(s) stitch(es)   
  • st  sl               slip stitch    
  • ch(s) chain
  • dc/sc UK double crochet / US single crochet
  • rev.dc/sc Reverse UK double crochet / US single crochet
  • htr/hdc             UK half treble / US half double crochet
  • tr/dc             UK treble / US double crochet

STITCH GUIDANCE:

  • Slip Stitch (sl st): Insert hook in st indicated, yarn over and draw through all loops.
  • UK Double Crochet/US Single Crochet (dc/sc): Insert hook in st indicated and draw up a loop (two loops on hook), yarn over, draw through both loops on hook.
  • UK half treble / US half double crochet (htr/hdc): Yarn over, insert hook in indicated st and pull up a loop (three loops on hook), yarn over, pull through all three loops on hook.
  • UK treble / US double crochet (tr/dc): Yarn over, insert hook in  indicated st and pull up a loop (three loops on hook), yarn over, pull through two loops, yarn over, pull through remaining two loops on hook.

PATTERN NOTES

Using a stitch marker: The bell is worked in the usual amigurumi style worked without joining in continuous rnds – place the stitch marker in the top of the first st to mark start of rnd.

Reverse Single Crochet (rev.dc/sc): A reverse single crochet stitch is worked the same as a regular single crochet — except in reverse. Instead of working from right to left, you work from left to right. Insert hook, from front to back, in the next st to the right and pull up a loop (two loops on hook), yarn over, pull through both loops on hook.

Pattern:

Bell:

Rnd 1: Make a magic ring, work 6dc/sc into ring. 6sts

Rnd 2: [2dc/sc] to end. 12 sts

Rnd 3: [1dc/sc, 2dc/sc] to end. 18 sts

Rnd 4: [1dc/sc in the next 2sts, 2dc/sc] to end. 24sts

Rnd 5: [1dc/sc in the next 3sts, 2dc/sc] to end. 30sts

Rnds 6-13: 1dc/sc in each st around

Rnd 14: [1dc/sc in the next 4sts, 2dc/sc] to end. 36sts

Rnd 15: 1dc/sc in each st around

Rnd 16: [1dc/sc in the next 5sts, 2dc/sc] to end. 42sts

Rnd 17: 1dc/sc in each st around. Fasten off and weave in ends.

Rnd 18: Attach Metallic Gold, rev.dc/sc in each st around. Fasten off and weave in ends.

Bell Handle:

Ch8, sl st to form a ring; sl st in each ch round until fasten off but leave a yarn tail for attaching to the centre top of the bell..

Bell Clanger:

Ch17, sl st in 2nd ch from hook, sl st in each st along until end. Use one yarn tail to attach the bell to the end of the strip just made, thread the other yarn tail through the centre of the strip and use it to attach to the inner bell centre.

Holly (make 2):

Ch7, sl st in 2nd ch from hook, * 1dc/sc in next st, 1tr/dc in the next, ch2, sl st to post of tr/dc * sl st in the next st, repeat from * to * once, sl st into first ch, ch2, sl st to first ch again, then working on other side of beginning ch; ch3, sl st to 2nd ch from hook, sl st to next st, 1dc/sc in next st, 1tr/dc in the next, fasten off but leave long yarn tail

Berries (make 2):

Ch6, 1dc/sc in 2nd ch from hook, htr/hdc in the next st, 1tr/dc in next, 1htr/hdc in the next, 1dc/sc in the next st, sl st to the first st to join, leave long yarn tail to attach.

To finish: Make a short hanging loop with metallic yarn around the bell handle.

And that’s it!

If you hook up a Little Christmas Bell Tree ornament I hope you’ll maybe give it a ‘love’ on Ravelry by saving to your favourites, tag @kcaco.uk on Instagram or share your projects in my Facebook group as I love to see your finished work! 

Until next time folks! Happy hooking and keep calm and crochet on my friends xx

Wordpress-Signature

Subscribe to Blog via Email

Enter your email address to subscribe to this blog and receive notifications of new posts by email.

Free Crochet Pattern |Mini Tapestry Christmas Tree Decorations

I love making Christmas decorations so when I got to try some Creativa Fino from Anchor Crafts (review of which you can read here) and as it’s December that’s what I decided to make.

Anchor-Tapestry-Xmas-02

You can scroll down to the written patterns and the charts for the Christmas Wreath and Christmas Tree mini tapestry pillow tree decorations below, but if you are new to tapestry crochet you might want have a look at my mini tapestry crochet tutorial first.

Mini Tapestry Crochet Christmas Tree Decorations:

Materials:

Yarn: 4ply / yarn weight #2

1 x 10g Anchor Creativa

  • Blue (Shade 00269)
  • Green (Shade 00418)
  • Brown (Shade 00257)

Pattern will work in other hooks and yarns though finished size will be different.

Hook: 2.5mm (US size C/2)

You will also need:

  • 1 x Anchor Grey Stranded Cotton (232)
  • A yarn needle
  • 1 x Small red bow
  • 8 x Small Red / 8 x Small Silver Beads
  • 1 x Small Star or Snowflake button
  • Small amount of polyester toy filler

Gauge: 5dc = 2cm (0.78inches)

Finished Size:  7 x 7cm (2.75 x 2.75 inches)

Abbreviations:

  • st(s) = stitch(es)
  • sl st = slip stitch
  • ch(s) = chain
  • dc/sc = UK double crochet / US single crochet
  • cc = change colour (see guidance for details)

Stitch Guidance:

  • Slip Stitch (sl st): Insert hook in st indicated, yarn over and draw through all loops.
  • UK Double Crochet/US Single Crochet (dc/sc): Insert hook in st indicated and draw up a loop (two loops on hook), yarn over, draw through both loops on hook.

Pattern Notes:

Changing Colour:

When changing to a different colour, pull the new colour through the last two loops of the previous st to complete that st. Continue in the new colour, following the pattern. Change colours in this manner, whenever indicated on the pattern.

Tapestry Crochet:

When changing to and from a colour carry the  unused coloured yarn along with you and crochet over the unused colour as they are carried along, when turning carry your yarn up the side of your work to use on the next row.

Surface Crochet:

Start by attaching a slip knot to the back of the crochet area then from the front of the work,  insert your hook into the stitch nearby and start working chain stitches on the surface of your crocheted area, continue to work in this way  according to the design.

Anchor-Tapestry-Xmas-03

Christmas Wreath (Make 2):

Row 1: With Blue; ch14; 1dc in the second ch from hook and in st along until end, turn. 13sts

Row 2: Ch1, 1dc in the same st as the beginning ch1, 1dc in the next 3sts, cc to Green, 1dc in the next 5sts, cc to Blue, 1dc in the remaining 4sts, turn

Row 3: Ch1, 1dc in the same st as the beginning ch1, 1dc in the next 2sts, cc to Green, 1dc in the next 7sts, cc to Blue, 1dc in the remaining 3sts, turn

Row 4: Ch1, 1dc in the same st as the beginning ch1, 1dc in the next st, cc to Green, 1dc in the next 3sts, cc to Blue, 1dc in the next 3sts, cc to Green, 1dc in the next 3sts, cc to Blue, 1dc in the remaining 2sts, turn

Row 5: Ch1, 1dc in the same st as the  beginning ch1, cc to Green, 1dc in the next 3sts, cc to Blue, 1dc in the next 5sts, cc to Green, 1dc in the next 3sts, cc to Blue, 1dc in the remaining st, turn

Rowd 6-8: Ch1, 1dc in the same st as the beginning ch1, cc to Green, 1dc in the next 2sts, cc to Blue, 1dc in the next 7sts, cc to Green, 1dc in the next 2sts, cc to Blue, 1dc in the remaining st, turn

Row 9: Repeat row 5

Row 10: Repeat row 4

Row 11: Repeat row 3

Row 12: Repeat row 2 – cut green yarn at the end of this row

Row 13: Ch1; 1dc in the same st as the beginning ch1, 1dc in the second ch from hook and in st along until end, turn. 13sts

  • Fasten off and weave in ends.
  • With Green surface crochet around the outside of the wreath shape.
  • On one side of the wreath shape sew a small red bow and eight red beads around the wreath – see photo above for more details.

Anchor-Tapestry-Xmas-04

Christmas Tree (Make 2):

Row 1: With Blue; ch14; 1dc in the second ch from hook and in st along until end, turn. 13sts

Rows 2-3: Ch1, 1dc in the same st as the beginning ch1, 1dc in the next 4sts, cc to Brown, 1dc in the next 3sts, cc to Blue, 1dc in the remaining 5sts, turn

Row 4: Ch1, 1dc in the same st as the beginning ch1, 1dc in the next 3sts, cc to Brown, 1dc in the next 5sts, cc to Blue, 1dc in the remaining 4sts, turn

Row 5: Ch1, 1dc in the same st as the beginning ch1, 1dc in the next 5sts, cc to Brown, 1dc in the next st, cc to Blue, 1dc in the remaining 6sts, turn

Row 6: Ch1, 1dc in the same st as the beginning ch1, 1dc in the next st, cc to Green, 1dc in the next 9sts, cc to Blue, 1dc in the remaining 2sts, turn

Rows 7 – 8: Ch1, 1dc in the same st as the beginning ch1, 1dc in the next 2sts, cc to Green, 1dc in the next 7sts, cc to Blue, 1dc in the remaining 3sts, turn

Rows 9 – 10: Ch1, 1dc in the same st as the beginning ch1, 1dc in the next 3sts, cc to Green, 1dc in the next 5sts, cc to Blue, 1dc in the remaining 4sts, turn

Row 11: Ch1, 1dc in the same st as the beginning ch1, 1dc in the next 4sts, cc to Green, 1dc in the next 3sts, cc to Blue, 1dc in the remaining 5sts, turn

Row 11: Ch1, 1dc in the same st as the beginning ch1, 1dc in the next 5sts, cc to Green, 1dc in the next st, cc to Blue, 1dc in the remaining 6sts, turn – cut green yarn at the end of this row

Row 13: Ch1; 1dc in the same st as the beginning ch1, 1dc in the second ch from hook and in st along until end, turn. 13sts. Fasten off and weave in ends.

  • With Green / Brown surface crochet around the outside of the tree shape.
  • On one side of the tree shape sew small star or snowflake button at the top and eight silver beads for baubles on the tree – see photo for more details.

Finishing:

  1. Place both wreaths / Christmas tree pieces  together, attach blue yarn through both pieces and neatly work 1dc/sc along each edge with 5dc/sc in each corner. Stuff as you go. Fasten off and weave in ends
  2. With Anchor Grey Stranded Cotton Ch30, fasten off but leave long yarn tail.
  3. Attach to the top centre of each pillow decoration as the hanging loop.

Charts:

Christmas-Wreath-Chart

Christmas-Tree-Chart

I hope you will join me in hooking up some little pillow decorations, they are really fun to make! I hope you’ll tag me on social media or link any projects to Ravelry so I can see – I love to see what you make.

Many thanks to Anchor Crafts for supplying the yarn so I could make this pattern for you.

Until next time folks! Happy hooking and keep calm and crochet on my friends xx

Wordpress-Signature.jpg